POWER MANAGEMENT: Application Resources
This project demonstrates how to emulate the functionality of a MAXIM MAX1582 white LED driver with a PSoC device. This driver is intended to power a circuit containing 2 to 6 white LEDs from a...
>>
Overvoltage protection (OVP) devices protect downstream circuits from overvoltage conditions that occur during load-dump events or transients. This application note discusses techniques of design...
>>
This application note is about UFB60FA40 insulated modules which integrate two state-of-the-art International Rectifier's Ultrafast recovery rectifiers in the compact, industry standard SOT-227...
>>
The challenge for power systems designers is to make the most of the technologies available in a system that manages energy storage and power delivery as two complementary requirements.
>>
Auto-track sequencing is a feature available on select power modules in the Texas Instruments plug-in power solutions family. The feature is designed to simplify the amount of external circuitry...
>>
For applications requiring output currents of 100mA or less, a circuit converts -5V to +5V by operating a switched-capacitor converter backwards. The MAX1681 voltage converter is used as the example.
>>
With the introduction of the 65-nm Cyclone® III family, Altera continues to deliver greater capabilities to designers of cost-sensitive high-volume applications. The move to the 65-nm process...
>>
The AAT4285 SmartSwitch is a P-channel MOSFET power switch designed for high-side load switching applications. The MOSFET operates from a 3.0V to 13.2V input range making it ideal for applications...
>>
This white paper details out International Rectifier's Power Conversion Processor TM Architecture. Monolithic integration of high voltage circuits for gate driving with protection, soft start...
>>
This webcast illustrates how Fairchild optimizes the design of its high-voltage MOSFETs and rectifiers to meet different needs, and discusses the performance of Fairchild's new SiC Schottky diodes.
>>
For applications requiring output currents of 100mA or less, a circuit converts -5V to +5V by operating a switched-capacitor converter backwards. The MAX1681 voltage converter is used as the example.
>>
For Automotive applications, device optimization
requires both system and device level simulation in order
to properly predict its performance and thermal response,
especially in the case of...
>>
These easy-to-use 8-pin ICs contain all of the features needed to develop an IEEE 802.3af-compliant powered device. The TPS237x family is a second-generation PDC featuring 100-V ratings and a true...
>>
The FAN4800 is a controller for power-factor-corrected, switched-mode power supplies.
>>
The year 2006 turned out to be stellar for the shipment of battery-powered portable electronic devices. Last year, consumers bought over 950 million cell phones, 220 million notebooks, 140 million...
>>
A demonstration inverter has been
built to illustrate the feasibility of implementing an
ISA inverter in a 42V automotive powernet using
discrete semiconductor switches. The component
count is...
>>
Reference Guide for Fixed-Frequency, Continuous Conduction-Mode Operation
>>
Specifying the right reference and applying it correctly is a more difficult task than one might first surmise, considering that references are only 2- or 3-terminal devices. Although the word...
>>
Thin-film electroluminescent panels operate on a principle of successive pulses of opposite polarity. These pulses must exceed a threshold of approximately 200 V for the panel to emit light.
>>
Designing Switching Voltage Regulators With the TL494 and Implementing a Direct Thermocouple Interface With MSP430x4xx and ADS1240
>>
This paper is a distillation of the company's findings in designing high-voltage analog ICs. The material primarily covers BiCMOS HV technology, with features including both bipolar and MOS...
>>
LCD Drivers...LED Drivers...VFD Drivers...White-LED Power Supplies
>>
One of the most common elements in today's consumer and automotive electronics is the liquid crystal display (LCD). LCD technology has produced a large array of products that meet a wide range of...
>>
Notebook PC’s are reducing in size at an alarming rate, and with each reduction, they need to squeeze the power for next generation microprocessors. This application note is about the Dual...
>>
In this design reference guide you will find solutions by application and function as well as a list of our new products for ultra-portable market. A list of application notes is included at the...
>>
Applications dial-in processor frequency and voltage to manage power consumption
>>
Applying digital methods to the control of power converters, in particular board-mounted dc/dc converters, offers a rich set of possibilities from which to create new features, improved...
>>
Set of 800+ Application Notes related to Display Drives
>>
This application note is about UFB60FA40 insulated modules which integrate two state-of-the-art International Rectifier's Ultrafast recovery rectifiers in the compact, industry standard SOT-227...
>>
The purpose of this paper is to highlight the most common subjects driving a half bridge power stage in motor drive applications (with monolithic IC gate driver) and to suggest appropriate...
>>
This Application Note describes the design methodology of a Continuous Conduction Mode Power Factor Correction circuit utilizing a boost converter and featuring the IR1150S PFC IC. It presents a...
>>
Lithium-ion (Li-ion) chemistry has evolved as the battery chemistry of choice for many portable applications. However, design engineers face increased challenges to charge these batteries fast,...
>>
As ICs marched down the technology path from 1.0 to 0.18 µm, SoC designers and their customers enjoyed faster and more complex IC, without a significant increase in power consumption.
>>
IRF Site contains various articles on Automotive design applications, solutions, design support.
>>
Future air land and sea vehicles demand highly efficient speed controls for continuous duty machines such as fuel pumps, airflow machines/fans, and compressors. Controls are positioned near loads...
>>
Automotive Power Mana